PANTS & SHIRTS Sizing Calculations
How to get YOUR CORRECT SIZE !
Important Notice:
Our Sizing Chart boards give measurment’s informations of the pants sizes, so you will have to calculate the size of your own pants, not the size of your physical body.
The best to get the exact size you need, would be to take the measurement of one of your pants that fit you correctly.
So you are going to take the measurement of your pants from the top left side to the top right side (upper part of the pants, so at the belt area)
To do so, put your pants on a flat surface and do the measure starting from the inside of the pants (not from the outside as we dont want to get the thickness of the fabric in the total waist calculation), and figure out the available space for your body to fit in perfectly.
Here is a photo showing you how to get the correct measurements.
As we said you have to calculate what is the available space for your body to fit inside the pants.
The best way will be to put the pants as flat as possible (where we will take the measurements, i.e. at waist level) with the edges well stretched but not too much either.
The best is to get a rendering position as natural as possible.
On the picture above you can see that the pants are well stretched but not too much! Calculation will be accurate !
On the contrary you should avoid taking measures with pants that make folds or that are over stretch! as it will result in bad measure for your final size choice 😉
in the following photo you can see that the pants are not stretched, kind of loose, making folds so the calculation will be wrong.e
After you got the Waist Across measure as shown above, you can refer to our sizing chart to confirm the size you need, you can also double the result to get your complete round waist.
The pants from our first exemple photo has a measurement from left to right of 42,5 cm, we double it (42,5 x 2) : making the total a 85cm round waist.
According to our sizing chart the measure from our exemple is a Medium size.
In case you find a measurement just in between 2 sizes, you can consider to order the size up to avoid getting tight inside your pants (always better to get a bit more space than a bit not enough) and you can ask us to select the smallest piece we have in stock in your selected size.
If you are not sure, you can ask us sizing confirmation for the pieces left in stock 😉 and be free to ask us any other information on how to get your correct size… Happy to help!
You can find in all pages and for each kind of designs the proper sizing chart regarding the lengh of the pants. (Longpants, Quarter pants, Shorts pants, Harem pants and Highshort pants)
The Waist size calculation is the same for all kind of designs, just the lengh of the pants will change !
SHIRTS Sizing Calculations
Important Notice:
Our Sizing Chart boards give measurment’s informations of the shirts sizes, so you will have to calculate the size of your own shirts, not the size of your physical body.
Lay your shirt flat (or teeshirt if you dont have any shirts) without pulling too much on the fabric and without leaving any folds.
Measure the “Chest Across” of your shirt, from the left side to the right side (chest area starting and finishing just below the sleeve seam.)
See our below photos to be sure where to take the measures, so you get the correct calculation
